How To Find Longitude And Latitude Of A Property

Disclaimer: Any method you use to exercise this, especially with a consumer GPS unit of measurement, is going to be an approximation at best. If you truly want to know where the boundaries are, y'all will demand to locate property pins/corners which might require a metallic detector. Your best, safest choice is to hire a professional person land surveyor.

No, those are not lat/longs in the description. Those are bearings and distances. What yous take is a metes and bounds description which locates a point, gives bearing and distance to the adjacent indicate, and and so on all the fashion around and back to the point of showtime (known as a traverse). Such descriptions commonly, and in the case of the example y'all give, refer to the Public Land Survey Arrangement (PLSS) in the US.

To locate a section corner you lot'll need to either guess information technology from data or observe a criterion. For some states you lot tin locate a GIS version of the PLSS grid - encounter PLSS shapefiles - alternative to geocommunicator.gov? Simply practise note those aren't surveyed - some points are (command network) and the rest are calculated to fit. You lot could besides check with the county to see if they brand their survey control network available. This would have actual surveyed corners and locations of benchmark monuments, possibly with lat/long coordinates already provided. You'd have to locate the nearest benchmark and work your fashion to it - the plat survey should have note on it somewhere of such a criterion. If all you have is the description, you're on your own. And since you'll exist starting at a quarter-quarter corner, you're unlikely to find a monument correct at that place (they're usually sections or quarters at all-time).

Once y'all find that point, from your example the description starts immediately. In some cases there are commencement calls that get y'all to a truthful point of beginning, and then the shape starts. From there it'due south an orienteering exercise.

To get all this into GPS coordinates, yous'll need to know at least ane signal's lat/long and work out the rest, or plot the description and unproject it to a geographic coordinate organisation. A related question, though for a different country, tin be found at Outline a plot of land on a map. You lot don't mention what software you're using or accept access to. If you lot specify something, more than aid could exist given.

Honestly, your best bet is to go to the county GIS website (per your descripton). Using their online map application, you tin can get a pretty adept idea of where the packet is and perchance turn imagery on to get some landmarks to utilise in locating it. Their section grid is on by default, zoom in far enough and yous'll be able to encounter the labels to locate 03-25-2E per their labeling scheme. Looks like it's on the north finish of the City of Bainbridge Island. Since I can't run into the total description, nor do I know exactly where the quarter-quarter corners are, I'm guessing it's one of the parcels in the vicinity of the i outlined in light-green below. The SE corner of the SW4 NW4 is somewhere around the bottom right corner of that parcel. I've outlined the section in carmine, because the gray dashed line they apply is kind of difficult to see. If the documents you have include a parcel ID number or accost, you can look that upwardly directly in the organisation.

You can as well use that page to identify the correct packet, and then pull information technology upwardly in Google Maps where if you right-click a point and choose What's Here? it will give y'all the lat/long coordinates of that signal. So yous could get a rough idea where the corners are then become ballpark coordinates to use in your GPS. Which think a consumer grade unit is only going to be authentic down to about 3m anyway.

Source: https://gis.stackexchange.com/questions/153328/locating-property-corners-using-plat-map-description

Posted by: truemansweeng.blogspot.com

Share this post